Software Owner manual

206 Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012
Chapter 3 Understanding Your System Solution
3.1. Selection
In the Selection tab, you perform a search for the drive/motor solution for your
application, based on the drive and motor families you selected previously. The
search also includes a gearbox, if gearbox was selected in the Transmission tab.
Figure 152 - Sizing and Selection Dialog Box
The search for possible drives and motors is performed based on these two
options:
• Select Full if you want the search performed on the entire database of
motors, drives, and gearboxes.
• Select My Preferred if you want the search performed on motors, drives,
and gearboxes that you have selected within My Preferred Database
on
page 62
.
Searching methods include these two options:
• Select Automatic
if you want Motion Analyzer software to perform the
search based on the selected database option (refer to page 207
).
• Select Manual
if you want to select the components (motor, drive, and/or
gearbox) from a list (refer to page 208
).