Software Owner manual

Rockwell Automation Publication MOTION-UM004B-EN-P - October 2012 197
Sizing Your System Chapter 2
Enter the following parameters to further narrow the motor options and help you
decide which motor is best for your application.
Table 116 - Motor Series Selection Properties
Figure 147 - Compatible Motor Series
Table 117 - Motor Series Legend (refer to Figure 147
)
Parameters Description
Applications
Requirements
(label 1 in Figure 146
)
Maximum Speed
Values are based on the information you entered in the previous tabs. These values cannot be
changed in this tab.
Continuous Torque
Peak Torque
Ambient
Temp er at ure
Ambient temperature for the application environment.
Altitude Altitude for the application environment.
Brake From the Brake pull-down menu, choose YES or NO depending on your application.
Display Window
(label 2 in Figure 146
)
Displays the available motor series. As application requirements are entered or motor series are selected, incompatible
motors are dimmed and crossed-out (boxed in red in Figure 147).
Symbol Description
By hovering over this symbol, the particular motor series’ voltage ratings are displayed.
Indicates that the motor series supports the application.
Indicates that the motor series support for the application is marginal.
Indicates that the motor series is not recommended for the application.
Indicates that the motor series is incompatible with the application.