Manual

Publication RA-UM001B-EN-P - November 2010
46 Developing an HMI Application
Alarming
When the files from the Data Retrieval Tool (HMITag-[shortcut name].csv
and Alarms-[shortcut name].csv) have been imported, all the necessary alarm
configuration of the Tags from the Data Retrieval Tool is complete.
The imported alarms use the configuration in the Alarm Setup (double-click
the Alarm Setup) on the User Msgs tab.
Where,
Alarm date = 11d
Alarm time = 8t
Alarm Label = 10l
Alarm tag name = 40n
Alarm threshold value = 15v
Alarm units = 10u
Additional alarms must be configured accordingly.