Owner manual

5-4 PROFIBUS Communications Module
Step 3. Find the directory location of the data file(s) you wish to
add (typically, the source location is a floppy disk in drive
A:). “R_E_07FF.gsd” is the GSD file for the
MDCOMM-PBUS as shown in figure 5.5.
Step 4. Select “R_E_077FF.gsd” for the MDCOMM-PBUS and
click O
pen.
Figure 5.4 – Add PROFIBUS Devices Applet Window
Figure 5.5 – Adding the GSD File for the RECOMM-PBUS