User Manual

B-4 Serial Converter Module (MDCOMM-232)
Number of DF1 packets receiv ed by the Serial Converter. The v alue
of this parameter is normally approximately equal to the value of
DF1 Packets Sent (07).
Number of DF1 messages that were sent but not acknowledged.
This value is normally a low va lue. If it is continually incrementing
and you are having communications problems, use a lower baud
rate or replace the RECBL-SFC serial cable.
Number of ENQ (Enquiry) characters sent by the Serial Converter.
This value is normally a low va lue. If it is continually incrementing
and you are having communications problems, use a lower baud
rate or replace the RECBL-SFC serial cable.
Number of ENQ (Enquiry) characters received by the Serial
Converter.
This value is normally a low va lue. If it is continually incrementing
and you are having communications problems, use a lower baud
rate or replace the RECBL-SFC serial cable.
08 DF1 Packets Rcvd
Range: 0 to 4294967295
Default: 0
Type: Read Only
09 Undelivered Msgs
Range: 0 to 65535
Default: 0
Type: Read Only
10 ENQs Sent
Range: 0 to 65535
Default: 0
Type: Read Only
11 ENQs Received
Range: 0 to 65535
Default: 0
Type: Read Only