User Manual

Configuring the Serial Converter 4-5
Step 9. Click OK. A blank HyperTerminal work space appears.
Step 10. Select File > Properties to display the Properties dialog
bo x.
Step 11. Click the Settings tab. See figure 4.5.
Step 12. Under the area labeled Function, arrow, and ctrl keys act
as, select Terminal keys.
Step 13. I n th e Emulatio n box, select VT100.
Step 14. Click OK to display the HyperTerminal workspace.
TIP: Select File > Save to save the HyperTerminal configuration
that you just created. In future connections, you can select the
saved configuration and quickly connect to the Serial Converter.
Step 15. Press Enter until the main menu appears (see figure 4.6).
Figure 4.5 – Converter Properties Dialog Box
Figure 4.6 – Main Menu
Main Menu - Enter Number for Selection
1> Display Setup Parameters
2> Display Event Queue
3> Flash Upgrade