User Manual

58 Rockwell Automation Publication LX-UM001A-EN-P - March 2011
Chapter 6 Configure and Start Up the LX-Series Linear Motor
Additional Adjustments for
Cooling Plate Option
If your linear servo motor has the cooling plate option installed, catalog number
LDC-xxxxxx-CP, follow these steps to adjust Continuous Torque/Force Limit.
1. Click the Limits tab.
2. Set the Continuous Torque/Force Limit to reflect the motor cooling
configuration.
For linear motors, this field data entry is limited to integer values from
0…150%.
Cooling Option Used Value
No cooling plate 0…100%
Cooling plate with forced air 0…120%
Cooling plate with forced water 0…150%
IMPORTANT
Increasing or decreasing the motor continuous current rating does not
change the drives’ continuous current limiting.