User Manual

50 Rockwell Automation Publication LX-UM001A-EN-P - March 2011
Chapter 6 Configure and Start Up the LX-Series Linear Motor
10. Click OK to set the values.
11. Click the Conversion tab.
12. Using the screen image as a reference, configure the parameters as shown in
the Setting column.
13. Click OK.
Parameter Setting Comment
Positioning Mode Linear –
Conversion Constant 200 5 µm encoder
500 2 µm encoder
1000 1 µm encoder
2000 0.5 µm encoder
10,0000 0.1 µm encoder
51200 20 µm pitch Sin/Cos encoder
25600 40 µm pitch Sin/Cos encoder