User Manual

48 Rockwell Automation Publication LX-UM001A-EN-P - March 2011
Chapter 6 Configure and Start Up the LX-Series Linear Motor
6. Using the screen image as a reference, configure the parameters as shown in
the Setting column.
Figure 7 - RSLogix 5000 Software, Version 15.00 and 16.00, TTL Encoder
Figure 8 - RSLogix 5000 Software, Version 15.00 and 16.00, Sin/Cos Encoder
Parameter Setting Comment
Feedback Type TTL or Sin/Cos For RSLogix 5000 software,
version 16
TTL with Hall or Sin/Cos with Hall For RSLogix 5000 software,
version 17
Cycles 50 5 µm encoder
125 2 µm encoder
250 1 µm encoder
500 0.5 µm encoder
2500 0.1 µm encoder
50 20 µm Sin/Cos encoder
25 40 µm Sin/Cos encoder
per Millimeters –
Interpolation Factor 4 TTL
1024 Sin/Cos