Quick Start Owner's manual
Table Of Contents
- 1756-QS001E-EN-P, Logix5000 Controllers Quick Start
- Summary of Changes
- Table of Contents
- 1 - Program and Test a Simple Project
- What You Need
- Before You Begin
- Follow These Steps
- Create a Project for the Controller
- Add Your I/O Modules
- Look at Your I/O Data
- Ladder Logic
- Enter a Function Block Diagram
- Assign Alias Tags for Your Devices
- Establish a Serial Connection to the Controller
- Download a Project to the Controller
- Select the Operating Mode of the Controller
- 2 - Organize a Project
- 3 - Program Add-On Instructions
- What You Need
- Follow These Steps
- Insert an Add-On Instruction
- Copy an Add-On Instruction Definition
- Import an Add-On Instruction Definition
- Access a Parameter That Is Not Visible
- Monitor or Change the Value of a Parameter of an Add-On Instruction
- View the Logic of an Add-On Instruction
- Edit and Monitor an Add-On Instruction
- Update an Add-On Instruction to a Newer Revision
- 4 - Program an Equipment Phase
- 5 - Program a Project Offline
- 6 - Document a Project
- 7 - Go Online to the Controller
- 8 - Program a Project Online
- 9 - Troubleshoot the Controller
- Index
- Back Cover
96 Publication 1756-QS001E-EN-P - October 2009
Chapter 5 Program a Project Offline
Limit a tag name to 40 characters. Here are the rules for a tag name:
• Only alphabetic characters (A-Z or a-z), numeric characters (0-9), and
underscores (_)
• Must start with an alphabetic character or an underscore
• No more than 40 characters
• No consecutive or trailing underscore characters (_)
• Not case sensitive
Use mixed case. Although tags are not case sensitive (upper case A is the same as lower case a), mixed
case is easier to read.
These tags are easier to read Than these tags
Tank_1 TANK_1
Tank1 TANK1
tank_1
tank1
Consider the alphabetical order of tags. RSLogix 5000 software displays tags of the same scope in alphabetical order. To make it
easier to monitor related tags, use similar starting characters for tags that you want to
keep together.
Guideline Details
Starting each tag for a tank with
Tank keeps the tags together.
Tag Name
Tank_North
Tank_South
…
Otherwise, the tags may end up
separated from each other.
Tag Name
North_Tank
…
…
…
South_Tank
other tags that start
with the letters o, p,
q, and so on.