Quick Start Owner's manual
Table Of Contents
- 1756-QS001E-EN-P, Logix5000 Controllers Quick Start
- Summary of Changes
- Table of Contents
- 1 - Program and Test a Simple Project
- What You Need
- Before You Begin
- Follow These Steps
- Create a Project for the Controller
- Add Your I/O Modules
- Look at Your I/O Data
- Ladder Logic
- Enter a Function Block Diagram
- Assign Alias Tags for Your Devices
- Establish a Serial Connection to the Controller
- Download a Project to the Controller
- Select the Operating Mode of the Controller
- 2 - Organize a Project
- 3 - Program Add-On Instructions
- What You Need
- Follow These Steps
- Insert an Add-On Instruction
- Copy an Add-On Instruction Definition
- Import an Add-On Instruction Definition
- Access a Parameter That Is Not Visible
- Monitor or Change the Value of a Parameter of an Add-On Instruction
- View the Logic of an Add-On Instruction
- Edit and Monitor an Add-On Instruction
- Update an Add-On Instruction to a Newer Revision
- 4 - Program an Equipment Phase
- 5 - Program a Project Offline
- 6 - Document a Project
- 7 - Go Online to the Controller
- 8 - Program a Project Online
- 9 - Troubleshoot the Controller
- Index
- Back Cover

67Publication 1756-QS001E-EN-P - October 2009 67
Chapter
5
Program a Project Offline
This chapter provides more detailed information on how to program the logic for a routine and create tags
for the logic.
What You Need
You need these items to complete the tasks in this manual:
• Personal computer running RSLogix 5000 Software, version 16
• A plan for the project you are programming
Before You Begin
In this chapter, you program the project while offline. Online programming requires additional steps. See
chapter Chapter 8, Program a Project Online.
Follow These Steps
1. Enter ladder logic (page 68).
2. Export/import ladder logic (page 73).
3. Enter a function block diagram (page 77
).
4. Use a faceplate for a function block (page 81).
5. Enter structured text (page 84
).
6. Enter a sequential function chart (page 87
).
7. Assign operands (page 89
).
8. Verify a project (page 92).
9. Review guidelines for tags (page 94
).