Quick Start User guide

Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012 45
Use a PowerFlex 40 Drive in an RSLogix 5000 Project Chapter 3
Download the Project
1. Save your RSLogix 5000 project.
2. Move the controller’s mode switch
to the PROG position.
3. Click the Controller Status icon
and choose Download.
4. On the Download dialog box,
click Download.
The project downloads to the
controller.
5. Move the controller’s mode switch
to the RUN position.
IMPORTANT
If you receive a fault
message on your
PowerFlex 40 drive, press
on the keypad to
clear the fault.
RUN
REM
PROG
RUN
REM
PROG