Quick Start

32 Rockwell Automation Publication IASIMP-QS033A-EN-P - March 2012
Chapter 2 Create a PanelView Plus Application
The Design (Local) tab defines the
path from the computer to the
controller.
The Runtime (Target) tab defines
the path from the PanelView Plus
terminal to the controller.
Computer Logix5000
Controller
Term ina l
TargetLocal
The computer needs to
communicate with the
controller when you are in
Test Run mode. This path is
defined on the Local tab.
The PanelView Plus terminal also
needs to communicate with the
controller, but that is sometimes
a different path. This path is
defined on the Target tab.