Quick Start Owner's manual

38 Rockwell Automation Publication IASIMP-QS032A-EN-P - March 2012
Chapter 2 Add a Kinetix 350 Drive to an RSLogix 5000 Project
2. Type the new motion group Name.
3. Click Create and Close.
The new motion group appears
under the Motion Groups folder.
4. Right-click the new motion group
and choose Properties.
The Motion Group Properties
dialog box opens.
5. Click the Axis Assignment tab and
move the axis you created
beginning at step 12
from
Unassigned to Assigned.
6. Click OK.