User guide

Panel Mount Kit for LiquiFlo AC Drives M/Ns 50LW4060, 50LR4060, 64LW4060, and 64LR4060 1
Panel Mount Kit
for LiquiFlo AC Drives
M/Ns 50LW4060, 50LR4060, 64LW4060, and 64LR4060
Model Number 64L4060PM
Instruction Manual D2-3449-2
Product Description
This instruction manual describes how to install an optional panel mount kit on C-frame LiquiFlo AC drives,
M/Ns 50LW4060, 50LR4060, 64LW4060, and 64LR4060. The kit comprises items that make panel mounting of
a LiquiFlo AC drive safer and easier. Each kit includes bus bar jumpers, pressure lugs, insulation, hose
assemblies, a fan assembly, a printed circuit board cover, and the necessary mounting hardware.
Verifying Kit Contents
Panel mount kit M/N 64L4060PM can be used only with C-frame LiquiFlo AC drives, M/Ns 50LW4060,
50LR4060, 64LW4060, and 64LR4060. Kit contents are listed in table 1, and are indicated by circled item
numbers in figure 1.
!
ATTENTION: Only qualified personnel familiar with the construction and operation of this
equipment and the hazards involved should install, adjust, operate, and/or service this equipment.
Read and understand this instruction manual in its entirety before proceeding. Failure to observe
this precaution could result in severe bodily injury or loss of life.
Table 1 – Panel Mount Kit Contents
Item Description Qty
Part Number
1 Jumper Bus Bar “R” 1 179246
2 Jumper Bus Bar “S” 1 179247
3 Jumper Bus Bar “T” 1 179248
4 Printed Circuit Board Cover 1 179249
7 Fan Assembly 1 807300-278R
8 Pressure Lug 6 116504
9 1/2“ Flat Washer 6 103237
10 1/2“ Split-Ring Lock Washer 6 103234
11 1/2-13 UNC x 1.50“ Hex Head Screw 3 200612
12 1/2-13 UNC x 1.25“ Hex Head Screw 3 105270
13 M6x1 x 13 mm Thread Rolling Screw 2 103179
14 3/8 -16 UNC x 1.50” Hex Head Screw 3 601741-47E
15 3/8” Flat Washer 6 601748-14A
16 3/8“ Split Ring Lock Washer 3 601748-3L
17 3/8-16 UNC Nut 3 200518
18 Insulation (2.00” I.D., 3.00” long) 3 417901-51ASX
19 Cable Tie (nylon material, 11.5” long) 3 108578