Owner's manual
Table Of Contents
- Front Cover
- Important User Information
- Summary of Changes
- Table of Contents
- Introduction
- About the Drive
- Identifying the Drive by Cabinet Assembly ID Number
- LiquiFlo 2.0 Drive Component Locations
- Identifying the Power Module by Model Number
- AC Line I/O Board Description (Frame 3 Only)
- Standard I/O Board Description (Frame 3 Only)
- Combined I/O Board Description (Frame 4 Only)
- DPI Communication Ports
- Optional Equipment
- Planning the Installation
- Mounting The Power Module and Grounding the Drive
- Installing Input and Output Power Wiring
- Completing the Installation
- Using the Start-up Routines
- Programming Basics
- Parameter Descriptions
- Troubleshooting the Drive
- Verify that the DC Bus Capacitors are Discharged Before Servicing the Drive
- Determining Drive Status Using the Status LEDs
- About Alarms
- About Faults
- Diagnostic Parameters
- Common Symptoms and Corrective Actions
- Replacement Parts
- Board Replacement, Firmware Setup Procedures
- Troubleshooting the Drive Using the OIM
- Checking the Power Modules with Input Power Off
- Technical Specifications
- Using the OIM
- Installing and Removing the OIM
- Display Description
- OIM Menu Structure
- Powering Up and Adjusting the OIM
- Selecting a Device in the System
- Using the OIM to Program the Drive
- Monitoring the Drive Using the Process Display Screen on the OIM
- Displaying and Changing the OIM Reference
- Customizing the Process Display Screen
- Customizing the Function Keys
- Controlling the Drive From the OIM
- LiquiFlo 2.0 Drive Frame 3 Wiring Diagrams
- LiquiFlo 2.0 Drive Frame 4 Wiring Diagrams
- Index
- Back Cover

178 Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
Displays the run time accumulated over the life of the product.
Displays the time that power was applied to the drive.
Displays the accumulated number of times power was cycled over the life of the
product.
Increments when there is a DPI error.
Increments when a DPI client/server message is received.
153 Life Run Time
Range: 0.0000 to 429496.7295 hours
Default: Read Only
Access: 0 Path: Internal Data > Total Elapsed
See also:
154 Life Power Time
Range: 0.0000...429496.7295 hours
Default: Read Only
Access: 0 Path: Internal Data > Total Elapsed
See also:
155 Life Power Cycle
Range: 0...4294967295
Default: Read Only
Access: 0 Path: Internal Data > Total Elapsed
See also:
156 DPI Error
Range: 0...255
Default: Read Only
Access: 0 Path: Internal Data > DPI Counters
See also:
157 CS Msg Rx Cnt
Range: 0...65535
Default: Read Only
Access: 0 Path: Internal Data > DPI Counters
See also: