Instruction Manual

Parameter Descriptions 3-73
.
Determines which ports can control the drive when Write Mask Act (597), bit 15 is set
to “1.” If the bit for a port is set to “0,” the port will have no control functions except for
stop.
Controls which adapters can issue start commands.
Controls which adapters can issue jog commands.
276 Logic Mask
Range: See figure 3.27
Default: See figure 3.27
Access: 2 Path: Communication>Masks & Owners
See also: 288-297
Figure 3.27 – Logic Mask (276)
11
1
111xxxxxxxxxx
10 01234567891112131415
1 =Control Permitted
0 =Control Mask
x = Reserved
Bit #
Digital In
DPI Port 1
DPI Port 2
DPI Port 3
DPI Port 4
DPI Port 5
Factory Default Bit Values
277 Start Mask
Range: See figure 3.27
Default: See figure 3.27
Access: 2 Path: Communication>Masks & Owners
See also: 288-297
278 Jog Mask
Range: See figure 3.27
Default: See figure 3.27
Access: 2 Path: Communication>Masks & Owners
See also: 288-297