Instruction Manual

Parameter Descriptions 3-77
Modules that are presently issuing a valid stop command.
Adapters that are presently issuing a valid start command.
Adapters that are presently issuing a valid job command.
Adapter that currently has exclusive control of direction changes.
288 Stop Owner
Range: See figure 3.30
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also: 276 - 285
Figure 3.30 – Stop Owner
000100 xxxxxxxxxx
10 01234567891112131415
1 =Issuing Command
0 =No Command
x =Reserved
Bit #
Digital In
DPI Port 1
DPI Port 2
DPI Port 3
DPI Port 4
DPI Port 5
Reserved
Nibble 1Nibble 2Nibble 3Nibble 4
289 Start Owner
Range: See figure 3.30
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also: 276 - 285
290 Jog Owner
Range: See figure 3.30
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also: 276 - 285
291 Direction Owner
Range: See figure 3.30
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also: 276 - 285