Instruction Manual

Parameter Descriptions 3-75
Controls which adapters can issue MOP commands to the drive.
Controls which adapters are allowed to take exclusive control of drive logic commands
(except stop). Exclusive “local” control can only be taken while the drive is stopped.
Disables manual requests at the port corresponding to bit number.
284 MOP Mask
Range: See figure 3.27
Default: See figure 3.27
Access: 2 Path: Communication>Masks & Owners
See also: 288-297
285 Local Mask
Range: See figure 3.27
Default: See figure 3.27
Access: 2 Path: Communication>Masks & Owners
See also: 288-297
286 Manual Mask
Range: See figure 3.28
Default: See figure 3.28
Access: 2 Path: Communication>Masks & Owners
See also:
Figure 3.28 – Manual Mask (286)
1111 xxxxxxxxxxx
10 01234567891112131415
0 =Control is disabled
1 =Control is enabled
x =Reserved
Bit #
Terminal Blk
DPI Port 3
DPI Port 2
DPI Port 4
Default Value
Reserved
1
Local OIM
Network
287 Manual Owner
Range: See figure 3.29
Default: See figure 3.29
Access: 2 Path: Communication>Masks & Owners
See also: