Owner's manual

Reach Drive Pump Control Kit

Instruction Manual D2-3563

Reach Drive Pump Control Kit Recommended Order of Assembly

Recommended Order of Assembly

ATTENTION: To prevent electrical shock, disconnect from power source before installing or

servicing. Failure to observe this precaution could result in severe bodily injury or loss of life.

Number Part Description

1Din Rail

2 M4 Washer

3M4 Screw*

4 End Anchors

5 Fuse Block

6 Contactor

7 Overload Contactor

8 Panel Mount Adapter

*The recommended torque for the Din Rail Screws is 17 in/lbs.

PAGE 1
Reach Drive Pump Control Kit Instruction Manual D2-3563 Reach Drive Pump Control Kit Recommended Order of Assembly 1 2 3 5 8 7 6 4 Recommended Order of Assembly ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing. Failure to observe this precaution could result in severe bodily injury or loss of life.
PAGE 2
1 2 3 5 13 A1 4 6 14 A2 Assembled Pump Control Kit www.rockwellautomation.com Power, Control and Information Solutions Headquarters Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.
PAGE 3
PAGE 4
U.S. Drives Technical Support Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: support@drives.ra.rockwell.com, Online: www.ab.com/support/abdrives Trademarks not belonging to Rockwell Automation are property of their respective companies. Publication D2-3563-November 2006 Copyright © 2006 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.