User Manual

B-4 LiquiFlo AC Drive, Software Reference Version 6.4
Parameter No. Parameter Name Setting Date
Second
Menu
Vector
U.000 Torque Reference Source
U.001 Encoder PPR
U.002 Motor Poles
U.003 Motor Nameplate Base Frequency
U.004 Motor Nameplate Amps
U.005 Motor Nameplate RPM
U.006 Magnetizing Current
U.007 Motor Nameplate Volts
U.008 Torque Self-Tune Enable
U.009 Torque Self-Tune Result
U.012 Speed Regulator Proportional Gain
U.013 Speed Regulator Integral Gain
U.014 Torque Regulator Proportional Gain
U.015 Torque Regulator Integral Gain
U.016 Field Weakening Start RPM
U.017 Motor Top Speed
U.018 AC Line Volts
U.019 Flux Current Regulator Proportional Gain
U.020 Flux Current Regulator Integral Gain
U.021 Rotor Time Constant
U.022 Motor Nameplate Horsepower
U.023 Low DC Bus Fault Avoidance Enable
U.024 High DC Bus Fault Avoidance Enable
U.025 Zero Speed Hold Time
U.026 Current Compounding Gain
U.027 Inertia Compensation Gain
U.028 Losses Compensation Gain
U.030 SVC Slip Adjust
U.031 SVC Sync Direction
U.032 SVC Flux Current Regulator Gain
U.040 Outer Control Loop Feedback Source
U.041 Outer Control Loop Lead/Lag Select
U.042 Outer Control Loop Lead/Lag Low Frequency
U.043 Outer Control Loop Lead/Lag Ratio
U.044 Outer Control Loop Reference Gain
U.045 Outer Control Loop Proportional Gain
U.046 Outer Control Loop Integral Gain
U.047 Outer Control Loop Trim Range Percentage
U.048 Outer Control Loop Proportional Trim Enable