User Manual

Programming Reference 4-47
This parameter must be set at the drive via the keypad/display or via a personal
computer serial interface. This parameter cannot be written to the drive by the network
master.
For AutoMax applications, refer to the AutoMax Network Communication Option
Board manual (D2-3308).
For DeviceNet applications, refer to the DeviceNet Network Communication Option
Board manual (HE-HGV3DN).
For ControlNet applications, refer to the ControlNet Network Communication Option
Board manual (D2-3390).
For
PROFIBUS applications, refer to the PROFIBUS Interface Board manual (49’1355)).
For AutoMax applications, refer to the AutoMax Network Communication Option
Board manual (D2-3308).
For DeviceNet applications, refer to the DeviceNet Network Communication Option
Board manual (MAN0096-03).
For ControlNet applications, refer to the ControlNet Network Communication Option
Board manual (D2-3390).
For
PROFIBUS applications, refer to the PROFIBUS Interface Board manual (49’1355).
P.060 Network Drop Number
This parameter
specifies the base
drop number or node
number to the drive
Parameter Range: Network-dependent
Default Setting: 1
Parameter Type: Configurable
Refer also to parameters: P.061 Network Connection Type
P.061 Network Connection Type
This parameter is
network-dependent.
Refer to the
appropriate network
manual for the
parameter
description.
Parameter Range: Network-dependent
Default Setting: 0
Parameter Type: Configurable
Refer also to parameters: N/A