User Manual

Publication LDL-UM001A-EN-P - March 2009 45
Configure and Start Up the LDL-Series Linear Motor Chapter 6
RSLogix 5000 Software Version 17.00 TTL Encoder
RSLogix 5000 Software Version 17.00 Sin/Cos Encoder
7. Click OK to set the values.
8. Click the Units tab.
9. Using the screen image as a reference, configure the parameters
as shown in the Setting column.
You can change position units to inches, or other units, on this
tab.
Example for a 5 µm resolution encoder:
200 drive cnts/mm x 25.4 mm/in.
Conversion Constant = 5080 drive cnts/in.
Parameter Setting
Position Units mm
Average Velocity Timebase 0.25 s