User Manual

12 LD-Series Motor Installation Instructions

Publication LD-IN001A-EN-P — September 2000

Cables and Connector Kits

Factory manufactured cables are available in standard cable lengths. They

can provide environmental sealing and shield termination. The following

cables are for connecting the LD-Series motors.

Catalog Number Description

9101-1375-XXX

Cable, Encoder Feedback to

ULTRA 100 or ULTRA 200 Drive

(with encoder and drive mating connectors)

9101-1385-XXX

Cable, Motor Power to Drive

(with motor connector and pigtail to drive

terminals)

9101-1786-XXX

Cable, Encoder Feedback to

Ultra3000 or Ultra5000 Drive

(with encoder and 45° drive mating

connector)

9106-0066 Connector Kit

(kit includes connector, pins and backshell for

both the power and encoder connectors)

The last three digits (XXX) indicate a standard cable length:

010 = 3 m (10 ft)

025 = 7 m (25 ft)

050 = 15 m (50 ft)

075 = 23 m (75 ft)

The last three digits (XXX) indicate a standard cable length:

001 = 1 m (3.3 ft)

003 = 3 m (10 ft)

009 = 9 m (30 ft)

015 = 15 m (50 ft)

030 = 30 m (100 ft)