User Manual Instruction Manual

6-14 GV6000 AC Drive User Manual
6.7.5 Auto/Manual Control
Manual control is not exclusive and is granted to the last device requesting it.
If an OIM has manual control and power is removed from the drive, the drive will return
to Auto mode when power is reapplied.
6.8 Remote OIM Configuration
If a remote OIM is connected as the user interface for speed reference or logic control.
Logic Source Sel (89) and Speed Ref A Select (90) must be configured for the
connection port to which the remote OIM is attached. Typically, a remote OIM is
connected to port 2 or port 3.