User Manual Instruction Manual
Installing Power Wiring
5-3
5.2 Power Terminal Block Specifications
Note: See table 2.7 and figure 2.4 for terminal block descriptions and locations.
Table 5.2 – Power Terminal Block Specifications
No. Name Frame Description
Wire Size Range
1
Torque
Maximum Minimum Maximum Recommended
➊
Power Terminal
Block
0 & 1 Input power and
motor connections
4.0 mm
2
(10 AWG)
0.5 mm
2
(22 AWG)
1.7 N-m
(15 lb.-in.)
0.8 N-m
(7 lb.-in.)
2 Input power and
motor connections
10.0 mm
2
(6 AWG)
0.8 mm
2
(18 AWG)
1.7 N-m
(15 lb.-in.)
1.4 N-m
(12 lb.-in.)
3 Input power and
motor connections
25.0 mm
2
(3 AWG)
2.5 mm
2
(14 AWG)
3.6 N-m
(32 lb.-in.)
1.8 N-m
(16 lb.-in.)
BR1, 2 terminals
10.0 mm
2
(6 AWG)
0.8 mm
2
(18 AWG)
1.7 N-m
(15 lb.-in.)
1.4 N-m
(12 lb.-in.)
4 Input power and
motor connections
35.0 mm
2
(1/0
AWG)
10 mm
2
(8 AWG)
4.0 N-m
(35 lb.-in.)
4.0 N-m
(35 lb.-in.)
5
(75 HP)
Input power, BR1,
2, DC+, DC– and
motor connections
50.0 mm
2
(1/0
AWG)
2.5 mm
2
(14 AWG)
See Note
2
PE
50.0 mm
2
(1/0
AWG)
4.0 mm
2
(12 AWG)
5
(100 HP)
Input power, DC+,
DC– and motor
70.0 mm
2
(2/0
AWG)
16.0 mm
2
(6 AWG)
BR1, 2, terminals
50.0 mm
2
(1/0
AWG)
2.5 mm
2
(14 AWG)
PE
50.0 mm
2
(1/0
AWG)
4.0 mm
2
(12 AWG)
6 Input power, DC+,
DC–, BR1, 2, PE,
motor connections
120.0
mm
2
(4/0
AWG)
2.5 mm
2
(14 AWG)
6 N-m
(52 lb.-in.)
6 N-m
(52 lb.-in.)
➋
SHLD Terminal 0-6 Terminating point
for wiring shields
——1.6 N-m
(14 lb.-in.)
1.6 N-m
(14 lb.-in.)
➌
AUX Terminal
Block
0-4 Auxiliary Control
Voltage
PS+, PS–
3
1.5 mm
2
(16 AWG)
0.2 mm
2
(24 AWG)
——
5-6
4.0 mm
2
(12 AWG)
0.5 mm
2
(22 AWG)
0.6 N-m
(5.3 lb.-in.)
0.6 N-m
(5.3 lb.-in.)
➍
Fan Terminal
Block (Common
Bus Only)
5-6 User Supplied
Fan Voltage (See
section 3.1.1.4.)
4.0 mm
2
(12 AWG)
0.5 mm
2
(22 AWG)
0.6 N-m
(5.3 lb.-in.)
0.6 N-m
(5.3 lb.-in.)
1. Maximum/minimum sizes that the terminal block will accept - these are not
recommendations.
2. Refer to the terminal block label inside the drive.
3. External control power: UL Installation-300V DC, ±10%, Non UL Installation-270-600V
DC, ±10% 0-3 Frame - 40 W, 165 mA, 5 Frame - 80 W, 90 mA.