User Manual Instruction Manual

Index-8 GV6000 AC Drive User Manual
Torq Ref B Mult (434), 11-104
Torq Reg Enable (526), 11-137
TorqAlarm, 11-115, 11-116
TorqAlarm Action (633), 11-115
TorqAlarm Dwell (634), 11-116
TorqAlarm Level (632), 11-115
TorqAlarm TO Act (636), 11-116
TorqAlrm, 11-116
TorqAlrm Timeout (635), 11-116
TorqLim SlewRate (608), 11-114
TorqProv Setup (601), 11-112
TorqProve Cnfg (600), 11-111
Torque Adapt Spd (525), 11-137
Torque Current (4), 11-2
Torque Prove Sts (612), 11-115
Torque Ref A Hi (428), 11-103
Torque Ref A Lo (429), 11-103
Torque Ref A Sel (427), 11-103
Torque Ref B Hi (432), 11-103
Torque Ref B Lo (433), 11-103
Torque Ref B Sel (431), 11-103
Torque Reg Trim (529), 11-138
Torque Setpoint1 (435), 11-104
Torque Setpoint2 (438), 11-105
Total, 11-119
Total Gear Ratio (646), 11-119
Total Inertia (450), 11-107
Trim % Setpoint (116), 11-26
Trim Hi (119), 11-28
Trim In Select (117), 11-27
Trim Lo (120), 11-28
Trim Out Select (118), 11-27
Troubleshooting
common symptoms and corrective
actions, 11-19
using the LCD OIM, 11-23
U
Unbalanced Distribution Systems, 3-2
Ungrounded Distribution Systems, 3-2
Units, 11-120
Units Traveled (701), 11-120
User Sets, 2-13
dynamic mode, 2-13
normal mode, 2-13
V
V*S Utilities, 2-21
Vel Override (711), 11-122
Volt Stblty Gain (507), 11-134
Voltage class, 2-11
Voltage Class (202), 11-56
W
Wake Level (180), 11-48
Wake Time (181), 11-49
Wiring Examples
Encoder, 6-5
I/O, 6-7
Wiring requirements, drive, 3-14
Write, 11-144
Write Mask Actv (597), 11-144
Write Mask Cfg (596), 11-144
Z
ZeroSpdFloatTime (605), 11-113