User Manual Instruction Manual

A-2 GV6000 AC Drive User Manual
Table A.2 – Certifications
The drive is designed to meet the following specifications:
NFPA 70 - US National Electrical Code
NEMA ICS 3.1 - Safety standards for Construction and Guide for Selection,
Installation and Operation of Adjustable Speed Drive Systems.
IEC 146 - International Electrical Code.
UL and cUL Listed to UL508C and CAN/CSA-C2.2 No. 14-M91
Certified to AS/NZS, 1997 Group 1, Class A
Note: 600 VAC rated drives are not C-tick Compliant.
Marked for all applicable European Directives
1
EMC Directive (89/336/EEC)
Emissions
EN 61800-3 Adjustable Speed electrical power drive systems Part 3
Low Voltage Directive (73/23/EEC)
EN 50178 Electronic Equipment for use in Power Installations
Note: 600 VAC rated drives are not CE Compliant.
1
Applied noise impulses may be counted in addition to the standard pulse train causing erroneously high
Pulse Freq readings.
Table A.3 – Environment
Altitude 1000 m (3300 ft) max. without derating
Ambient Operating
Temperature without
derating:
IP20, NEMA 1
0 to 50°C (32 to 122°F)
Storage Temperature (all
const.)
–40 to 70°C (–40 to 158°F)
Atmosphere Important: Drive must not be installed in an area
where the ambient temperature contains a volatile or
corrosive gas, vapors, or dust. If the drive is not going
to be installed for a period of time, it must be stored in
an area where it will not be exposed to a corrosive
atmosphere.
Relative Humidity 5 to 95% non-condensing
Shock 15G peak for 11ms duration (±1.0 ms)
Vibration 0.152 mm (0.006 in.) displacement, 1G peak
U
c
US
L
®