User Manual Instruction Manual

About the Drive 2-21
2.7 Drive Communication Options
The flat-ribbon cable connector (labeled ➍ in figure 2.6) is a parallel bus
connection port that provides a means of attaching optional communication
modules.
Refer to the appropriate option module instruction manual for more information. See
table 2.11 for a list of available communication options.
2.8 Operator Interface Options
Table 2.12 lists the available operator interface options for the GV6000 AC Drive.
2.9 Regulator and Encoder Board Options
Table 2.13 lists the available regulator and encoder board options for the GV6000.
Table 2.11 – Standard Communication Kits and Options
Description Model Number Instruction Manual
DeviceNet Communication Module RECOMM-DNET D2-3478
Profibus Communication Module RECOMM-PBUS D2-3479
Interbus Communication Module RECOMM-IBUS D2-3480
ControlNet Communication Module RECOMM-CNET D2-3497
Ethernet/IP Communication Module RECOMM-ENET D2-3510
Modbus Communication Module RECOMM-H485 VT-1001-2
RS-485 DF1 Communication Module RECOMM-485 D2-3514
Table 2.12 – Operator Interface Options
Description Model Number
Standard OIM 6VKYPD-STD
Full Numeric OIM 6VKYPD-FN
Remote Mounted Nema 4 OIM 6VKYPD-N4
Blank OIM REBLNKOIM
Remote Mounted Nema 1 OIM Bezel Kit REBZL-N1
Table 2.13 – Regulator and Encoder Board Option Kits
Description Model Number
24 VDC Input Regulator Board
1
1.The drive is shipped with one of the above regulator boards and the encoder board installed. The user
can purchase one of the above kits to field replace a damaged board or to change the digital input voltage
from 24 VDC to 115 VAC (or vice versa).
6VREG-024A
115 VAC Input Regulator Board
1
6VREG-115B
Encoder Board
1
6VENC-OPT