User Manual Instruction Manual

13-56 GV6000 AC Drive User Manual
13.20.4 Analog Output Configuration Examples
This section gives a few examples of valid analog output configurations and describes
the behavior of the output in each case.
Example 1 -- Unsigned Output Quantity:
• Analog Out1 Sel (342) = “Output Current”
• Analog Out1 Lo (344) = 1 volt
• Analog Out1 Hi (343) = 9 volts
Note that analog output value never goes outside the range defined by Analog Out1
Lo (344) and Analog Out1 Hi (343). This is true in all cases, including all the following
examples.
Example 2 -- Unsigned Output Quantity, Negative Slope:
• Analog Out1 Sel (342) = “Output Current”
• Analog Out1 Lo (344) = 9 volts
• Analog Out1 Hi (343) = 1 volts
10V
Analog Out1 Hi (344)
Analog Out1 Lo (343)
0V
0% 200%
Output Current
Analog
Output Voltage
Output Current vs.
Analog Output Voltage
Marker Lines
10V
Analog Out1 Lo (344)
Analog Out1 Hi (343)
0V
0% 200%
Output Current
Analog
Output Voltage
Output Current vs.
Analog Output Voltage
Marker Lines