User Manual Instruction Manual

13-34 GV6000 AC Drive User Manual
13.15.1 Definitions
• Wake - A start command generated when the analog input value remains above
Wake Level ((180)or below when Invert mode is active)) for a time greater than
Wake Time (181).
• Sleep - A Stop command generated when the analog input value remains below
Sleep Level (182) (or above when Invert mode is active) for a time greater than
• Sleep Time (183).Speed Reference – The active speed command to the drive as
selected by drive logic and Speed Ref x Sel.
• Start Command - A command generated by pressing the Start button on the OIM,
closing a digital input programmed for Start, Run, Run Forward or Run Reverse.
Refer to Figure 13-16.