User Manual Instruction Manual

Troubleshooting the Drive 12-23
12.8 Replacement Parts
12.9 Troubleshooting the Drive Using the LCD OIM
The LCD OIM provides immediate visual notification of alarm or fault conditions as
well as the following diagnostic information:
• Entries in the fault queue
• Fault parameters
• Drive status parameters
• Selected device version and status information
• OIM version information
Table 12.17 – Replacement Parts List
Description Model Number
DeviceNet Communication Module RECOMM-DNET
Profibus Communication Module RECOMM-PBUS
Interbus Communication Module RECOMM-IBUS
ControlNet Communication Module RECOMM-CNET
Ethernet/IP Communication Module RECOMM-ENET
Modbus Communication Module RECOMM-H485
RS-485 DF1 Communication Module RECOMM-485
Standard OIM 6VKYPD-STD
Full Numeric OIM 6VKYPD-FN
Remote Mounted Nema 4 OIM 6VKYPD-N4
Blank OIM REBLNKOIM
24 VDC Input Regulator Board
1
1
The drive is shipped with one of the above regulator options and one of the encoder options. The user can
purchase one of the above options to field replace a damaged board or to change the digital input voltage
from 24 VDC to 115 VAC (or vice versa).
6VREG-024A
115 VAC Input Regulator Board
1
6VREG-115B
Encoder Option Board
1
6VENC-OPT
Removable Control I/O Terminal Block SK-G9-TB1-S1
Removable Encoder Terminal Block SK-G9-TB1-ENC1