User Manual Instruction Manual

Troubleshooting the Drive 12-3
12.2 Determining Drive Status Using the Status LEDs
Figure 12.2 – Location of Status LED’s
Table 12.1 – Status LED Definitions
Number Name Color State Description
➊
PWR
(Power)
Green Steady Power is applied to the drive.
➋
RDY
(Ready)
Green Steady Drive running, no faults are present.
Flashing Drive ready, but not running and no
faults are present.
Yellow Steady,
Drive Running
A continuous type 1 alarm condition
exists. Check Drive Alarm 1 (211).
Flashing,
Drive Stopped
A start inhibit condition exists and
the drive cannot be started.
Check Start Inhibits (214).
Flashing,
Drive Running
An intermittent type 1 alarm
condition is occurring.
Check Drive Alarm 1 (211).
Red Steady A non-resettable fault has occurred.
Flashing Fault has occurred. Check Fault x
Code or Fault Queue.
➌
DRIVE Green - Status of DPI Port internal
communications (if present).
MS Yellow - Status of communications module
(when installed).
NET A Red - Status of network (if connected).
NET B Red - Status of secondary network
(if connected).
➊
➋
➌
Frame 4
Exp
Param #
Frames 0 & 1