User Manual Instruction Manual

11-56 GV6000 AC Drive User Manual
Resets selected parameters that change the drive voltage rating, current rating,
scaling, and motor data. Maximum, Minimum and Default values for parameters
41-47, 54, 55, 62, 63, 69-72, 82, 148 and 158 will be affected by changing this
parameter.
Provides a checksum value that indicates whether or not a change in drive
programming has occurred (data values only).
Enables/Disables dynamic selection of user parameter sets.
202 Voltage Class
Range: 2 = Low Voltage
3 = High Voltage
4-5 = Reserved
Default: Based on Drive Type
Access: 2 Path: Utility>Drive Memory
See also: 41-47, 54, 55, 62, 63, 69-72, 82, 148, 158
203 Drive Checksum
Range: 0 to 65535 [1]
Default: Read Only
Access: 2 Path: Utility>Drive Memory
See also:
204 Dyn UserSet Cnfg
Range: See figure 11.10
Default: See figure 11.10
Access: 2 Path: Utility>Drive Memory
See also:
Figure 11.10 – Dyn UsrSet Cnfg
0 xx 0 xxxxxxxxxxxx
10 01234567891112131415
Bit #
Factory Default Bit Values
Dynamic Mode
Ctrl Source
Dynamic Mode
1 =Enabled
0 =Disabled
Ctrl Source
1 =[Dyn UserSet Sel]
0 =Digital Inputs
x = Reserved