User Manual Instruction Manual

Parameter Descriptions 11-49
Defines the amount of time at or above Wake Level before a start command is issued.
Defines the analog input level that will stop the drive.
Defines the amount of time at or below Sleep Level before a stop command is issued.
Sets the reaction to a loss of input power. Power loss is recognized when:
DC bus voltage is ≤ 73% of DC Bus Memory and Power Loss Mode is set to Coast.
DC bus voltage is ≤ 82% of DC Bus Memory and Power Loss Mode is set to Decel.
181 Wake Time
Range: 0.0 to 1000.0 Secs [0.1 sec]
Default: 0.0 sec
Access: 1 Path: Dynamic Control>Restart Modes
See also: 180
182 Sleep Level
Range: 4.000 mA, 0.000 V / Wake Level [0.001 mA, 0.001 V]
Default: 5.000 mA, 5.000 V
Access: 1 Path: Dynamic Control>Restart Modes
See also: 183
183 Sleep Time
Range: 0.0 to 1000.0 secs [0.1 sec]
Default: 0.0 sec
Access: 1 Path: Dynamic Control>Restart Modes
See also: 182
184 Power Loss Mode
Range: 0 = Coast
1 = Decel
2 = Continue
3 = Coast input
4 = Decel input
Default: 0 = Coast
Access: 1 Path: Dynamic Control>Power Loss
See also: 13, 184