User Manual Instruction Manual

Programming Basics 10-7
Setting the write-protect password in one OIM will not affect any other OIM connected
to the drive unless a write-protect password has also been set in the other OIMs. In
this case, the last password value entered becomes the password value for all
password-protected OIMs. (Each OIM cannot have a different password value.)
For example, if the write-protect password has been set to 5555 for the local OIM,
someone using a remote OIM with no write-protect password set can still program all
of the parameters. If the write-protect password is then set to 4444 on the remote
OIM, you will be required to enter 4444 on the local OIM to program the parameters.