User Manual Instruction Manual

9-2 GV6000 AC Drive User Manual
9.2 Running the Start-Up Routines
Upon the first power-up of the GV6000, a welcome screen is displayed that prompts
you for a language selection and then you are taken to the Quickstart Routine or to the
Start-up Menu. See Figure 9.1.
Upon suqsequent power-ups of the GV6000, you can return to the Start-Up Menu by
using the SEL key.
The Start-Up routine automates the process of entering values of selected parameters
by taking you to the next parameter after you accept a parameter value. As each item
in the list is completed, you are automatically advanced to the next step.
Important:Parameter values are saved as they are changed. Pressing or exiting
the Start-Up routine will not undo the changes.
!
ATTENTION:The drive start/stop/enable control circuitry includes solid
state components. If hazards due to accidental contact with moving
machinery or unintentional flow of liquid, gas or solids exist, an additional
hardwired stop circuit may be required to remove the AC line to the drive.
An auxiliary braking method may be required.
Figure 9.1 – Start-Up Menu
Press SEL to Exit
Start-Up
Start-Up steps you
through setup of the
drive using full text
prompts. Press ENTER
to proceed.
GV6000
Welcome!
ESC
Start-Up
Quickstart
To begin setup
of basic drive
operation, press
the ENTER key.
Quick Start Questions:
Regulation Type
Encoder PPR
Speed Units
Stop Type
Motor FLA
Maximum Speed
Minimum Speed
Acceleration Time
Deceleration Time
Speed Reference A
Current Limit
Quick
Start
Menu
Start-Up Routines
Quick Start
Motor Data
Motor Tests
Reference Setup
Configure I/O
Step Saver Routines
Applications
Press SEL to Exit
Press SEL to Exit
StartUp Param Diag Sel
ESC/
PROG