User Manual Instruction Manual

8-12 GV6000 AC Drive User Manual
8.9.4 Changing Motor Direction
When the OIM is the selected control source, pressing toggles motor direction.
If the drive is running, when is pressed, the motor ramps down to 0 Hz and then
ramps up to the set speed in the opposite direction. The reference to the motor
changes based on Accel/Decel time.
The OIM indicates “ ” when the motor is running forward or will run forward when
started (if not previously running). “ ” is indicated when the motor is running in
reverse or will run reverse when started (if not previously running). If the “ ” or
“ ” indication is flashing, it indicates the actual motor direction, but the drive is in
the process of decelerating the motor in order to change directions.
8.9.5 Jogging the Drive
When the OIM is the selected control source, pressing sends a jog command to
the motor as long as the key is pressed. JOG will stop when the key is released.
F
R
F
R
JOG