User Manual Instruction Manual

Using the LCD OIM 8-5
8.4 LCD OIM Menu Structure
8.5 Powering Up and Adjusting the LCD OIM
The first time the LCD OIM is powered up, you will be prompted to select a language
for the display text. (English is initially set as the default.) The OIM will display the
selected language on subsequent start-ups. The OIM displays the Start-Up menu at
each start up.
After initial power-up, the language can be changed by selecting Language from the
Display menu.
8.5.1 Selecting the Fast Power-Up Feature
The fast power up feature bypasses the initialization screen at power up, and the Main
Menu is displayed immediately. To select this feature, select Fast PowerUp Mode from
the Display Menu. This feature will remain active for subsequent power-ups of OIM
until re-programmed to be inactive.
8.5.2 Adjusting the Screen Contrast
To adjust screen contrast, select Contrast from the Display menu.
Figure 8.4 – LCD OIM Menu Structure
SEL
PARAM DIAGSTARTUP
Startup
SEL
PARAM DIAGSTARTUP
Parameters
SEL
PARAM DIAGSTARTUP
Diagnostics
Display
SEL
PARAM DIAG Display
Memory
SEL
Diag Display Memory
Password
SEL
Display Memory Psswrd
SEL
SEL
SEL
SEL
SEL
Quickstart
Motor Data
Motor Tests
Reference Setup
Configure I/O
Step Saver
Applications
Groups
Linear List
Changed Parameters
Alarms
Faults
Drive Status
Device Select
Device Name
Device Version
Device Items
Language
Disp Adjustments
Process Display
Reset Display
OIM CopyCat
Drive User Sets
Restore Defaults
Set Access Level
Set AccLvl Password
Set Wrt Prot Passwrd