User Manual Instruction Manual

8-4 GV6000 AC Drive User Manual
8.3.1 Key Descriptions
Key Function
Scroll through list options or decrease/increase parameter
values.
The SEL key selects the next tab and selects digit on numeric
data entry.
The Enter key accepts data changes and activates a selected
list item.
The Display key cycles through the display/status screens.
The FAULT/ALARM key cycles through fault queue and alarm
queue displays.
The AUTO/MAN key switches between selected Auto
reference and Local OIM reference. In AUTO mode, the drive
takes its reference from the selected programmed reference.
In MANUAL mode, the drive takes its reference from the local
OIM.
The ESC/PROG key goes back to the previous screen and
aborts the current menu state.
The Chevron keys Increases/Decreases local OIM reference.
Changes motor direction if the OIM is the control source.
The JOG key jogs the drive only when the drive is not running
and the logic control source is set to OIM upon which the Jog
is asserted. Hitting the JOG key slowly turns the drive for as
long as the key is pressed. JOG will stop when the JOG key is
released.
If the drive is in Jog mode, hitting the Start key will cause it to
switch to run mode.
Start drive.
The Start key only works if the logic control source is set to
the OIM upon which the Start is asserted.
Stop the drive/Reset active fault.
SE L
DISP
ALARM
FAU LT
MAN
AUTO
PROG
ESC
JOG