User Manual Instruction Manual

Using the LCD OIM 8-1
CHAPTER 8
Using the LCD OIM
The LCD Operator Interface Module (OIM) is a keypad/display that enables you to
program, monitor, and control the drive.
8.1 Connections
The LCD OIM can be used in the following ways:
Drive Mounted: The OIM connects directly to the drive using DPI port 1.
Hand-held: A cable (RECBL-LCD) must be used to convert the OIM for hand-held
use.
Remote Mounted: A remote mount OIM is available.
Note: For Hand-Held or Remote Mounted OIM’s, the maximum cable length is 32 feet
when using extender cables. The connection can be made directly to the external DPI
connector using DPI Port 2. If a splitter cable (RECBL-SSP) is used, both DPI Ports 2
and 3 are available.
Figure 8.1 – GV6000 Standard LCD OIM