Operator Interface Module (OIM) User Guide

GV3000/SE OIM Menu and Parameter Organization
B-11
•
MOP Configuration
• MOP ACCEL DECEL TIME (P.023)
• MOP RESET CONFIG (P.024)
•
Preset Speed Setup
• PRESET SPEED 1 (P.031)
• PRESET SPEED 2 (P.032)
• PRESET SPEED 3 (P.033)
• PRESET SPEED 4 (P.034)
• PRESET SPEED 5 (P.035)
• PRESET SPEED 6 (P.036)
• PRESET SPEED 7 (P.037)
• PRESET SPEED 8 (P.038)
B.2.8 Option Port Configuration Menu (If the Network Option Board Is
Installed)
These menus and parameters are only shown if the Network Option board is installed.
•
Network Configuration
• NETW DROP NUMBER (P.060)
• NETW CONNECT TYPE (P.061)
• NETW COMM LOSS RESP (P.062)
• NETW REF SOURCE (P.063)
• NETW TRIP REF SOURCE (P.064)
• NETW TYPE AND VERSION (P.065)
• OUTPUT REG 1 SOURCE (P.066)
• OUTPUT REG 2 SOURCE (P.067)
• OUTPUT REG 3 SOURCE (P.068)
• OUTPUT REG 4 SOURCE (P.069)