Manual

11-8
GV3000/SE Drive Version 6 Regulator Board Installation Instructions
Step 8. Press the ENTER key to access parameter P.099.
Sample display only. Your display
may be different.
The display shows the value that was either
automatically identified by the system or
manually selected.
Step 9. Refer to appendix A to verify that the value displayed is correct for your
drive.
If the value is correct, press the PROGRAM key to exit parameter P.099. Go
to chapter 12, "Restoring the Drive Configuration", in this manual.
If the value is incorrect, repeat the Power Module identification procedure.

Forward
Reverse
AUTO
MAN
ENTER
RUN
JOG
Program
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC