Reference Manual User Manual

Default Parameter Settings
E-3
Second Menu General Parameters (Continued)
Second Menu Volts/Hertz Parameters
❶
: Parameter default is Power Module-dependent
Parameter
No. Parameter Name
USA
(P.049 = USA)
EUROPE
(P.049 = EUr)
JAPAN
(P.049 = JPn)
P.063 Option Port: Network Reference Source 0 0 0
P.064 Option Port: Network Trim Reference
Source
000
P.065 Option Port: Type and Version Read only Read only Read only
P.066 Network Output Register 1 Source 0 0 0
P.067 Network Output Register 2 Source 0 0 0
P.068 Network Output Register 3 Source 0 0 0
P.069 Network Output Register 3 Source 0 0 0
P.090 Diagnostics Source 0 0 0
P.091 Diagnostics Display Read only Read only Read only
P.095 Power Module Output Amps Read only Read only Read only
P.098 Software Version Number Read only Read only Read only
P.099 Power Module Type Read only Read only Read only
Parameter
No. Parameter Name
USA
(P.049 = USA)
EUROPE
(P.049 = EUr)
JAPAN
(P.049 = JPn)
H.000 Motor Nameplate Volts 460 380 460
H.001 Motor Nameplate Base Frequency 60.0 50.0 60.0
H.002 Motor Nameplate Amps
❶❶ ❶
H.003 Torque Boost Voltage 0.5 0.5 0.5
H.004 Slip Compensation 0.0 0.0 0.0
H.005 DC Braking Enable OFF OFF OFF
H.006 DC Braking Start Frequency 1.0 1.0 1.0
H.007 DC Braking Current 10 10 10
H.008 DC Braking Time 3.0 3.0 3.0
H.009 Avoidance Frequency Enable OFF OFF OFF
H.010 Avoidance Frequency Midpoint 1 0.0 0.0 0.0
H.011 Avoidance Frequency Band 1 2.0 2.0 2.0
H.012 Avoidance Frequency Midpoint 2 0.0 0.0 0.0
H.013 Avoidance Frequency Band 2 2.0 2.0 2.0
H.014 Avoidance Frequency Midpoint 3 0.0 0.0 0.0
H.015 Avoidance Frequency Band 3 2.0 2.0 2.0
H.016 Sync Direction OFF OFF OFF
H.017 Input Power/Snubber Configuration 0 0 0
H.018 Volts/Hertz Curve Type 0 0 0
H.019 Identification Result 0 0 0
H.020 Identification Request OFF OFF OFF
H.021 AC Line Volts 460 380 400
H.022 Overfrequency Limit 90.0 65.0 75.0