User Manual

A-2
GV3000/SE AC Drive Hardware Reference, Version 6.06
Ta b l e A .2 – Environmental Condition
Condition Specification
Operating Temperature (Ambient) 0° to +40°C (32° to 104°F)
Storage Temperature (Ambient) -40° to +65°C (−40° to +149°F)
Humidity 5 to 95% (non-condensing)
Table A.3 – Terminal Strip Input Specifications
Signal Type Terminal(s) Specification
Speed Reference Input 12-15 10 V (@ 50K ohm input
impedance or 20 mA)
Digital Inputs (1 - 8) 16 +24 VDC Isolated Supply
17 Remote/Local (Default)
18 Ramp1/Ramp2 (Default)
19 Forward/Reverse (Default)
20 Function Loss
21 Run/Jog
22 Reset
23 Stop
24 Start
Table A.4 – Terminal Strip Output Specifications
Signal Type Terminal(s) Specification
Analog Output 10 -11
scaled signal
0-10 VDC or 4-20 mA
Snubber Resistor 26 - 27 Used with older Snubber
Resistor Braking Kits,
such as the M/N 2DB4010
series, that require a gate
turn-on signal from the
drive.
Table A.5 – Terminal Strip RS-232 Specifications
Signal Type Terminal(s) Specification
RS 232 Communications 1 XMIT
2RECV
3COMMON