User Manual
B-8
AutoMax Network Communication Option Board for the GV3000/SE AC Drive
U.028, Losses Compensation Gain 2 30 3, Vector 51
U.030, SVC Slip Adjust 3, Vector 20 3, Vector 53
U.031, SVC Sync Direction 3, Vector 21 0 to 7 3, Vector 54 0 to 7
U.032, SVC Flux Current Regulator Gain 3, Vector 22 3, Vector 55
U.040, OCL Feedback Select 3, Vector 0 8 to 15 1 58 8 to 15
U.041, OCL Lead/Lag Select 3, Vector 21 8 to 15 3, Vector 54 8 to 15
U.042, OCL Lead/Lag Low Frequency 3, Vector 23 3, Vector 57
U.043, OCL Lead/Lag Ratio 3, Vector 24 3, Vector 58
U.044, OCL Reference Gain 3, Vector 25 3, Vector 59
U.045, OCL Proportional Gain 3, Vector 26 3, Vector 60
U.046, OCL Integral Gain 3, Vector 27 3, Vector 61
U.047, OCL Trim Range Percentage 3, Vector 30 3, Vector 62
U.048, OCL Proportional Trim Enable 2 19 4 2 40 4
UAr (spurious host PC comm interrupt) 1 12 11 n/a
UbS (asymmetrical bus charge) 1 13 8 n/a
Vector torque feedback 2 1 n/a
Vector torque reference 2 0 n/a
Volts/Hertz Curve Type (H.018) 3, V/Hz 18 3, V/Hz 50
Volts/Hertz or Vector Regulation (P.048) 2 27 n/a
Zero Speed Hold Time (U.025) 3, Vector 19 3, Vector 48
Description or GV3000/SE Parameter
Read Only Read/Write
Drop Register Bit Drop Register Bit