User Manual

Parameter-to-Register Cross Reference B-5
P.006, Second Menu Password n/a n/a
P.007, Term Strip Digital Inputs Configure n/a n/a
P.008, Term Strip Speed Reference Source n/a n/a
P.009, Terminal Strip Analog Input Offset 2 5 1 42
P.010, Terminal Strip Analog Input Gain 2 6 1 43
P.011, Term Strip Analog Input Configure 2 7 1 44
P.012, Term Strip Analog Output Source 2 8 2 34 0 to 7
P.013, Output Relay Configuration 2 9 1 56
P.014, Trim Reference Source 2 10 1 57
P.015, Trim Gain Percentage 1 22 1 45
P.016, Draw Gain Percentage 1 23 1 46
P.017, Accel Time 2 (RAMP 2) n/a n/a
P.018, Decel Time 2 (RAMP 2) n/a n/a
P.019, S-Curve Enable 2 11 2 39
P.020, Jog Speed Reference 2 12 1 49
P.021, Jog Ramp Accel Time 2 13 2 35
P.022, Jog Ramp Decel Time 2 14 2 36
P.023, MOP Accel/Decel Time n/a n/a
P.024, MOP Reset Configuration n/a n/a
P.025, Stop Type 2 15 0 to 7 1 50
P.026, Function Loss Response 2 16 1 51
P.027, Forward/Reverse Configuration 2 17 2 37
P.028, Speed Display Scaling 2 18 1 52
P.029, Elapsed Time Meter 1 27 n/a
P.030, Elapsed Time Meter Reset n/a 1 53 0
P.031, Preset Speed 1 n/a n/a
P.032, Preset Speed 2 n/a n/a
P.033, Preset Speed 3 n/a n/a
P.034, Preset Speed 4 n/a n/a
P.035, Preset Speed 5 n/a n/a
P.036, Preset Speed 6 n/a n/a
P.037, Preset Speed 7 n/a n/a
P.038, Preset Speed 8 n/a n/a
P.039, Encoder Loss Enable 2 24 0 2 38 0
P.040, Motor Overload Enable 2 19 0 2 40 0
P.041, Motor Overload Type 2 20 2 41
P.042, Line Dip Ride-Through Time 2 21 2 42
P.043, Fault Auto Reset Attempts 2 22 2 43
P.044, Fault Auto Reset Time 2 23 2 44
P.045, Output Phase Loss Enable 2 24 1 2 38 1
P.047, Carrier Frequency (kHz) 2 26 2 47
P.048, Volts/Hertz or Vector Regulation 2 27 n/a
P.049, Country Defaults 2 28 2 49
P.050, Restore Defaults n/a n/a
P.051, Programming Disable n/a n/a
P.052,
AUTO/MAN Key Disable 2 24 3 2 38 3
P.053, Manual Reference Preset Enable 2 24 2 2 38 2
P.054, Level Sense Start Enable 2 19 1 2 40 1
P.055,
STOP/RESET Key Disable 2 24 4 2 38 4
P.060, Network Drop Number n/a n/a
P.061, Network Connection Type 1 28 1 61
Description or GV3000/SE Parameter
Read Only Read/Write
Drop Register Bit Drop Register Bit