User Manual

Register Map Tables 5-7
61* 0 to 7 Network Connection Type (P.061) 0 = basic; 1 = full C
8 to 15 Reserved
62* 0 to 7 Option Port: Communication Loss Response (P.062) T
8 to 15 Reserved
63 0 to 7 Option Port: Network Reference Source (P.063) 0 = direct; 1 to 8 = broadcast 1 to 8 C
8 to 15 Option Port: Network Trim Reference Source (P.064) 0 = direct; 1 to 8 = broadcast 1 to 8 C
Table 5.3 – Register Assignment for Drop_1 Area Read/Write Registers (Continued)
Register Bit Description or GV3000/SE Parameter Settings Update
†
*Only the low byte (bits 0 to 7) of this register is transferred. The high byte is ignored by the drive. †
Update Times: 5 ms = 5 ms. 5/0.5: 5ms if speed reference; 0.5 ms if torque reference. 350 ms = 350ms or less. T = 350ms or less when
tune/config enable is on. C = 350ms or less when tune/config enable is on and the drive is stopped.