User Manual

5-1

CHAPTER 5

This section presents the register map tables. Brief descriptions of parameters are

provided in the register map tables. For detailed parameter descriptions, refer to the

software manual. For parameter descriptions of network-specific parameters, see

section 3.3.

These map tables are for version 6.03 of the Regulator board. Earlier versions of the

board might have different parameter options.

5.1 Finding Data in the Register Map Tables

The register maps are listed in tables 5.2 through 5.9. The register maps describe the

registers and bits used by the GV3000/SE drive on the AutoMax network.

Table 5.1 – Location of Information in the Register Map Tables

Drop Data Type Table Page

1 Read Only

5.2 5-2

Read/Write

5.3 5-5

2 Read Only

5.4 5-8

Read/Write

5.5 5-10

3: Vector Read Only

5.6 5-12

Read/Write

5.7 5-13

3: V/Hz Read Only

5.8 5-15

Read/Write

5.9 5-16