User Manual

7-3

Wiring the Regulator Board Terminal Strip

Table 7.6 – Snubber Resistor Braking Connections (Terminals 26 and 27)

Terminal #

Signal

Snubber Resistor Braking Signal

+24 VDC Common

Table 7.7 – Status Relay Connections (Terminals 28-31)

Terminal #

Signal

N.C. Relay Contact

N.C. Relay Common

N.O. Relay Contact

N.O. Relay Common

Notes: Relay contact closure is programmable through parameter P.013. Refer to the

GV3000/SE Software Start-Up and Reference manual for more information.

Notes: These terminals are used with older Snubber Resistor Braking kits that require a

gate turn-on signal from the drive (for example, the M/N 2DB2010 series).